Packaging Details
Packaged by PE bag/Paper Carton
Port:Shanghai or Guangzhou
Lead Time:2-10days

The most common stretch wrap material is linear low-density polyethylene (LLDPE), which is produced by copolymerization of ethylene with alpha-olefins, the most common of which are butene, hexene and octene. The use of higher alpha-olefins (hexene or octene) gives rise to enhanced stretch film characteristics, particularly in respect of elongation at break and puncture resistance. Other types of polyethylene and PVC can also be used. Many films have about 500% stretch at break but are only stretched to about 100–300% in use. Once stretched, the elastic recovery is used to keep the load tight.
There are two methods of producing stretch wrap:
Blown: the resin is melted and extruded through an annular die, it is air-cooled. This is a slower process but provides for higher cling quality. Blown film is not a consistent extrusion process, leading to inconsistencies across the film web. The cost of production is also higher due to the quantity that can be produced per hour.
Cast: the film is extruded through a slot die, then passed over cooling rollers. This makes the cooling process quick. Cast films are more consistent and have better performance characteristics. The cling quality is not as good as blown but more can be produced in an hour with lower costs.